Universal OPAMP Board for DIP-8 Package

Rajkumar Sharma
1.017 Views
easy
Tested
SKU: EL111589
Quote Now
0 Likes

This is easy to build and very useful project for hobbyists and students to learn and create op-amp-based projects. The board accommodates a single op-amp in DIP-8 package. The project provides the user with multiple choices and extensive flexibility for different applications circuits and configurations. It provides the user with many combinations for various circuit types including active filters, differential amplifiers, and external frequency compensation circuits etc. A few examples of applications circuits are given below. LM358 op-amp is the right choice to use or any DIP-8 op-amp with the same pin configuration as LM358 can be used. It supports dual supply or single supply, Jumper J1 is provided to use this board with a single supply, D1 power LED.

Note: Refer to example circuit to test the board, it is bistable multivibrator.

Credits: All example schematics are from Analog Devices application notes.

Features

Single or Dual Supply User-defined (Jumper)
4 Pin Male Header Connector for inputs
3 Pin Male Header for Supply input (Single or Dual)
Jumper J1 Close for single Supply, Open for Dual Supply
LED D1 Power LED
Any DIP-8 Op-Amp Can be used Pin configuration – LM358
PCB Dimensions 51.44 x 44.77 mm

Similar Universal OPAMP boards

Schematic

Parts List

NO.	QNTY	REF.	DESC
1	1	CN1	4 PIN MALE HEADER PITCH 2.54MM
2	1	CN2	2 PIN MALE HEADER PITCH 2.54MM
3	1	CN3	3 PIN MALE HEADER PITCH 2.54MM
4	6	R1,C1,R2,C2,R3,C3	UD (USER DEFINED)
	7	R4,C4,C5,R6,C6,R7,R8	UD (USER DEFINED)
	6	C8,R9,R10,R11,R12,R13	UD (USER DEFINED)
	4	C13,R14,R15,R16	UD (USER DEFINED)
	3	R18,R5,C7	UD (USER DEFINED)
5	2	C9,C11	2.2uF PITCH 5MM
6	2	C10,C12	0.1uF CERAMIC
7	1	D1	LED 3MM RED COLOUR
8	1	J1	JUMPER/SHUNT
9	1	R17	1K 5% THT 1/4W OR 1/8W
10	1	U1	OP-AMP DIP-8
ALL RESISTORS 1/4W OR 1/8W ,		HIGHER WATTAGE VERTICAL MOUNTING,	ALL CAPACITORS PITCH 5MM