2 Channel Relay Board

Rajkumar Sharma
30.791 Views
easy
Tested
SKU: EL34772
Quote Now
0 Likes

This project is a 2 Channel Relay Board.

Description

2 channel Relay driver project can be controlled by feeding 2-12V trigger voltage, Very useful project for application like Micro-Controller based projects, Remote controller, Lamp on Off, and any circuits which required isolated high current and high voltage switching by applying any TTL or CMOS level voltage. Two LED works as operation indicator while in , 3 pins screw terminals to connect load and provides both normally open and normally closed switching.

Input: 12 VDC @ 84 mA
Output: Two SPDT relay
Relay specification: 5 A @ 230 VAC
Trigger level : 2 to 12 VDC
Header connector for connecting power and trigger voltage
LED on each channel indicates relay status
Power Battery Terminal (PBT) for easy relay output connection
Four mounting holes of 3.2 mm each
PCB dimensions 49 mm x 68 mm

Schematic

Connection

Parts List

Please follow and like us:

PCB

Downloads

2-_Relays_Board.pdf

11 Comments

Inline Feedbacks

View all comments

Mr. A.Das.

8 years ago

Can be easily convert as a remote switch by an infra-red T / R link , then it is very useful.

mixos

Author

Reply to Mr. A.Das.

8 years ago

You can also check this project: https://www.electronics-lab.com/project/4-channel-infrared-remote-relays/

stathis81

8 years ago

Can arduino uno connected to laptop fire it up?

Sidharth

7 years ago

what is the purpose of c1 and can i use a ceramic 0.1uF capacitor, if not can you please give me exact specifications of C1

mixos

Author

Reply to Sidharth

7 years ago

C1 is a filtering cap, used to reject noise from the power source, any 0.1uF cap will do the job.

Misbah

6 years ago

Dear

If i Want to use 5v Relay What Should I need to Change in the Circuit? In additional to it i also want to add HLK-PM01 – AC-DC-converter to supply 5v Relay More over I also want to connect this Relay to Arduino Uno or Node Mcu Via Wifi.

Awaiting for reply