ATmega64 Development Board

Radek Malina
drak.design@seznam.cz
13.313 Views
medium
Tested
0 Likes

This project is a development board for Atmel ATmega64 microcontroller and can be used to easily develop custom AVR firmware or as an introduction board to microprocessors and programming. A development board is better to be used instead of a breadboard setup as it facilitates the connection of the different components using PCB headers. The project was designed at the time when the Arduino board wasn’t available in the Czech Republic and is equipped with different modules.

Description

The features of this board are:

Atmega64 – all the ports available through pins, a different crystal can be connected (optional frequency crystal)
DS3231 RTC, real-time IC / I2C
Temp. DS1820 1wire Temp. sensor
EEPROM 24AA00SN / I2C EEPROM
USB Port FT232RL USB/RS232 converter
Buttons 8x -16x LED
Connect LCD Display 16×2
7segment-LED Display
N-FET For PWM
ISP Programming connector

All module pins are labeled for easy connection with the processor and there are separate connectors and jumpers for all MCU ports so you can easily connect, test and debug your firmware. Also there is an ISP programming connector J2.

The PCB can be powered via the USB connector, or with a voltage regulator through an external adapter.