18 PIN PIC Development Board

The PIC 18 PIN (DIP) Development / Evaluations Board demonstrates the capabilities of Microchip’s 8-bit microcontrollers, specifically, 18 Pin PIC16F1847. It can be used as a standalone demonstration board with a programmed part. With this board you can develop and prototype with all Microchip’s 18 PIN PIC microcontrollers. The board has a Reset switch and status LEDs. On board 3.3 V and 5V DC regulators allows using 3V and 5V PICs, This board support both 3.3V low power and normal 5V operation. All I/O Pins out with 2xfemale headers

Development Board Features:

•     16 I/O Ports
•     Onboard 5V and 3.3V Supply
•     3.3V or 5V Supply selection by jumper
•     Dual line I/O
•     On board Power Indication
•     On-board ICSP Port (PICKIT2 Standard Programming Port)
•     Well labeled legends
•     All outputs has provision for LEDs for output indication
•     Replaceable PIC Microcontroller,
•     Crystal and capacitor mounting under the PCB

PIC16F1847 Micro-Controller Specifications:

• Enhanced Mid-range Core with 49 Instruction, 16 Stack Levels
• Flash Program Memory with self read/write capability
• Internal 32MHz oscillator
• Integrated Capacitive mTouch Sensing Module
• Data Signal Modulator Module
• MI2C, SPI, EUSART w/auto baud
• 2 ECCP & 2 CCP (Enhanced/Capture Compare PWM)
• Comparators with selectable Voltage Reference
• 12 Channel 10b ADC with Voltage Reference
• 25mA Source/Sink current I/O
• Four 8-bit Timers (TMR0/TMR2/TMR4/TMR6)
• One 16-bit Timer (TMR1)
• Extended Watchdog Timer (EWDT)
• Enhanced Power-On/Off-Reset
• Brown-Out Reset (BOR)
• In Circuit Serial Programming (ICSP)
• On Board In-Circuit Debug
• Wide Operating Voltage (1.8V – 5.5V)
• Low Power PIC16LF182x/4x variants (1.8V – 3.6V)
• Standby Current (PIC16LF1847): 30 nA @ 1.8V, typical
• Program Memory Type Flash
• Program Memory (KB) 14
• CPU Speed (MIPS) 8
• RAM Bytes 1,024
• Data EEPROM (bytes) 256
• Digital Communication Peripherals 1-UART, 1-A/E/USART, 2-SPI, 2-I2C2-MSSP(SPI/I2C)
• Capture/Compare/PWM Peripherals 2 CCP, 2 ECCP
• Timers’ 4 x 8-bit, 1 x 16-bit
• ADC 12 ch, 10-bit
• Comparators 2
• Temperature Range (C) -40 to 125
• Operating Voltage Range (V)1.8 to 5.5
• Pin Count 18
• XLP Yes
• Cap Touch Channels 12

Schematic

Pinout

Photos

Please follow and like us: